flat pack gift boxes with lids process name, operation name and process name

     

1. Process name of flat pack gift boxes with lids:

   

   The process of gluing flat pack gift boxes with lids is composed of different processes. Each process is different in terms of simplicity and operation, but each process is of great significance. No matter which link has problems, it can affect the quality of the product, so , every sub-process in the process is crucial. The term name for the flat pack gift boxes with lids process is;

1.1. flat pack gift boxes with lids:

After the printing surface is die-cut, it is glued by a glue machine, and then pasted to the carrier.

1.2. Flat pack gift boxes with lids glue:

The process of applying glue to the packaging material with a glue machine.

1.3. flat pack gift boxes with lids stereotype:

Pick up the four sides of the die-cut or slotted gray board and stick the four corners with tape to make it a three-dimensional shape, and then paste it.

1.4. flat pack gift boxes with lids:

Put the finished flat pack gift boxes with lids into the mold, and apply pressure to the four sides and one plane at the same time, so that the packaging material and the gray board are fully bonded to ensure that the appearance of the product is flat and firm.

1.5. Flat pack gift boxes with lids

Flat pack gift boxes with lids After the outside of the box is pasted, the inner periphery or inner bottom needs to be pasted, mostly for the inner periphery and bottom.

1.6. Flat pack gift boxes with lids Tape:

Apply tape to the four corners of the die-cut and slotted grey board by hand or machine.

1.7. Flat pack gift boxes with lids

Die-cut gray board, cardboard or other materials, remove the corners outside the finished product.

   

      

2. Flat pack gift boxes with lids operation name:

    

    There are many operation steps in the production process of flat pack gift boxes with lids. The control of each step is the key to the production of flat pack gift boxes with lids. The quality of the process control determines the quality. The operation runs through the whole process, and the process connects the steps together, which is the most exciting thing in the production of flat pack gift boxes with lids. The term name for the flat pack gift boxes with lids operation is;

  

     

2.1. flat pack gift boxes with lids lining paper:

Before the gray board is die-cut, one side of the gray board is mounted with double-adhesive paper or other types of paper, and the inner wall of the box is white after die-cutting and molding.

2.2. flat pack gift boxes with lids:

On the bottom of the flat pack gift boxes with lids, stick a piece of coated paper, white card or white cardboard paper with gray background according to the process requirements.

2.3. flat pack gift boxes with lids flannel over paper bottom:

Paste 100-120 grams of double-adhesive paper on the back of the flannel to make the flannel flat and crisp, which is convenient for the pasting operation.

2.4. The flat pack gift boxes with lids pack to the end:

After the packaging material is glued, it is from the outside of the flat pack gift boxes with lids box, from the outside to the inside along the inner wall to the bottom.

2.5. The flat pack gift boxes with lids package turns in the end:

After the packaging material has been glued, extend from the outer side of the flat pack gift boxes with lids to the inner side, extend along the inner wall to the root, and then turn 90 degrees to the bottom of the inner box.

2.6. flat pack gift boxes with lids:

Wipe the edge of the flat pack gift boxes with lids with a flannel repeatedly to make the tissue paper wrapping material and the grey board fully adhered.

2.7. flat pack gift boxes with lids to scrape the edges:

After the packaging material is glued, mount it from the outside of the flat pack gift boxes with lids to the inside, and use a scraper to scrape the inside and outside of the four sides of the box to make it stick tightly and firmly.

2.8. flat pack gift boxes with lids wipe:

The process of wiping the dirt on the surface of the flat pack gift boxes with lids after pasting with a flannel cloth dipped in a little dirt remover.

2.9. Flat pack gift boxes with lids spray glue:

Put the glue into the appliance, spray the glue in the form of mist through air pressure, and evenly sprinkle it on the surface of the carrier.

2.10. flat pack gift boxes with lids brush glue:

The process of applying glue to a carrier with a brush.

2.11. flat pack gift boxes with lids:

The process of applying glue to a carrier in the form of threads or strips using a glue pot with a duckbill.

2.12. flat pack gift boxes with lids

The packaging material mounted on the gray board has the phenomenon of hanging and false sticking. Use a scraper to drive away the air in the middle to make the two stick tightly.

2.13. flat pack gift boxes with lids

After the packaging material has been glued, accurately position the shaped gray board bare box on the packaging material, first pick up the side with the ear, and at the top of the ear bend, pinch the ear with your thumb nail and turn it into the inner side, so that the It is flat and docile, and there will be no protruding feeling at the overlapping place after the adjacent sides are picked up.

2.14. flat pack gift boxes with lids:

The process of pasting and fixing the finished parts together according to the required parts using the specified type of glue.

    

 

    

3. Flat pack gift boxes with lids craft name

    

    The process design of flat pack gift boxes with lids starts from material application, glue selection, operation steps, process control, and quality inspection. Every link is inseparable from careful process arrangements. In the process description, in addition to the pre-production process design, The accuracy of the application and expression of the process name is particularly important. The inaccurate description of flat pack gift boxes with lids will bring many impacts to the subsequent production. Therefore, the accurate and standardized application of the term flat pack gift boxes with lids can guide The process is carried out in an orderly manner.

  

     

The term names for the flat pack gift boxes with lids craft are:

3.1. flat pack gift boxes with lids long sides:

The longest side of the rectangular box.

3.2. flat pack gift boxes with lids short side:

The shortest side of the rectangular box.

3.3. flat pack gift boxes with lids:

According to the structural form of the heaven and earth cover box, or the lining box made of the cover box or the bottom box, it is embedded in the box body and plays the role of fixing the contents or raising the space.

3.4. Flat pack gift boxes with lids:

Leave a certain distance between the gray board and the gray board, so that the leather case after pasting can be easily bent in place.

3.5. flat pack gift boxes with lids Nail Bits:

A half-crescent-shaped gap is die-cut at the edge of the flat pack gift boxes with lids, which is convenient for opening.

3.6. flat pack gift boxes with lids car line:

Paste a piece of cardboard with a grey background and white card on the inside of the PU leather, and then use a sewing machine to sew along the edges to make them together. After the paste is completed, you can see that there are even sewing lines at the corners of the box.

3.7. Flat pack gift boxes with lids:

The gusset or inner box is covered with a strip of wrapping material around the gusset or box.

3.8. Flat pack gift boxes with lids three sides:

flat pack gift boxes with lids use a strip of wrapping material to cover the front and two sides of the box, but not cover the back.

3.9. flat pack gift boxes with lids:

Paste a back sticker on the back of the flat pack gift boxes with lids and bottom box to connect the upper and lower boxes together.

3.10. Flat pack gift boxes with lids pre-folded:

For some paper with higher gram weight, after die-cutting, the crease line should be pre-folded once before forming.

3.11. flat pack gift boxes with lids:

The process of drying the finished flat pack gift boxes with lids in an open, convective and ventilated place.

3.12. flat pack gift boxes with lids magnet holes:

In order to keep the surface of the gray plate and the surface of the magnet in a plane, a part equivalent to the thickness of the magnet is removed from the surface of the gray plate to form a circular or rectangular concave pit.

3.13. flat pack gift boxes with lids:

flat pack gift boxes with lids on the edge of the box.

3.14. Flat pack gift boxes with lids are slotted on four sides:

Along the four sides of the cut or die-cut gray board card, according to the design distance, a V-shaped slot is opened, and it is formed at a 90-degree angle.

3.15. flat pack gift boxes with lids rim oil:

Generally, after the leather box is made, the exposed leather edge is smeared with the same color to achieve the same surface color as the edge color.

3.16. Flat pack gift boxes with lids opening hours:

When the adhesive is coated on the carrier, there is a period of time for complete solidification. During the effective time, the adhesion is the best. After the effective time, the performance will gradually decline, affecting the adhesion effect.

3.17. flat pack gift boxes with lids mould:

Tools used for positioning or support in the production process, the shape and structure of which are determined by product requirements.

3.18. flat pack gift boxes with lids scraper:

A tool used for leveling when pasting, the shape of which is different depending on the part used.

3.19. flat pack gift boxes with lids Hardware:

Metal parts used in combination of parts.

3.20. flat pack gift boxes with lids

Flat pack gift boxes with lids made of MDF.