The birthday gift packing box production process

    

1. The classic birthday gift packing box is the result of perfection in detail.

     

Today we will look at the process of creating a birthday gift packing box.

Common birthday gift packing boxes are divided into the following categories.

A. birthday gift packing boxes with a heavenly lid.

B. Book-shaped boxes birthday gift packing box

C. Folding boxes birthday gift packing box

D. One-piece boxes birthday gift packing box

C. Drawer boxes birthday gift packing box, etc.

  

     

　The process of making a birthday gift packing box is much more complicated than that of an origami box, which generally consists of printing - surface finishing (hot metal stamping, silver stamping, laminating, partial UV, embossing, etc.) - die-cutting - gluing - inspection - boxing.

　　Most of the high-grade birthday gift packing boxes that are commonly used in our daily activities are made of paper, and paper-fronted birthday gift packing boxes are most suitable for more technical processing, so the following is a technical description of paper birthday gift packing boxes.

    

     

2. Selection of paper for birthday gift packing boxes

    

　　The choice of paper for birthday gift packing boxes is very important according to the design requirements of the customer's document and the effect to be reflected. The main considerations in this regard are:

(1) the type of paper used for birthday gift packing box, such as whether to use coated paper, art paper or pearl paper? The thickness of the birthday gift packing box paper.

(2)The paper should not be too thick, as it will easily wrinkle when framed, but it should not be too thin either, as otherwise the embossing effect will not be reflected.

(3) Consider the decorative effect of the birthday gift packing box surface.

     

       

3. Decoration of the surface of the birthday gift packing box

    

The most common types of birthday gift packing box are mainly offset printing, and then various types of artwork based on this are

(1) Reverse varnishing of birthday gift packing boxes;

(2) lamination of birthday gift packing boxes (glossy, matt, tactile, scratch-resistant, etc.);

(3) stamping of the birthday gift packing box (metallic, red metallic, coloured metallic, silver, laser, etc.);

(4) partial scratch UV oil or silk grid ink for birthday gift packing box;

(5) Special colour powder for birthday gift packing box;

(6) Embossing of birthday gift packing box;

(7)embossing of birthday gift packing box, etc.

      

     

4. birthday gift packing box grey board paper selection

    

　　The birthday gift packing box grey board, referred to as grey cardboard, is created from a type of recycled waste paper. birthday gift packing box is mainly divided into single grey, double grey, full grey and highlighted, depending on the customer's requirements for the flatness of the birthday gift packing box surface. It is an environmentally friendly birthday gift packing box material with quotas ranging from 250g to 10,000g and thicknesses from 0.4mm to 20mm, with no upper limit on thickness or quotas, and is usually selected according to the size of the birthday gift packing box.

    

   

5. Determining the birthday gift packing box

    

5.1. finalise the birthday gift packing box design

5.2. Confirm the birthday gift packing box sample and place an order for production

5.3. Dispatching the production materials for the birthday gift packing box (face paper, enclosure, inner sticker, backing paper, cardboard or density board, inner tray material, etc.)

5.4. Printing of birthday gift packing box wrapping paper and inner stickers (printing of hand bags is required if matching hand bags are available)

5.5. birthday gift packing box post-production work (lamination, embossing, UV, hot metal, embossing, die-cutting, etc.)

5.6. birthday gift packing box box opening

  

    

a. Birthday gift packing box wrapping paper, printed face paper, inner sticker, face plate, wrapping plate and inner tray of grey board material Cut to a set size using a paper cutting machine (density board needs to be cut with a professional large saw) 

b. Birthday gift packing box face plate processing: V-groove cutting with a V-groove machine, gluing iron 

c. Birthday gift packing box panel processing: drilling magnet holes with a hole-punching machine 

d. Birthday gift packing box inner support: the inner support is grey board, which needs to be die-cut and then glued with cut silk fabric; the inner support is foam, which needs to be tied with cut silk fabric on the moulded foam.

  

    

　5.7. birthday gift packing box: stick the paper on the face of the box (the face of the box should be scraped flat and the edges should be wrapped solidly), stick the paper on the inside, and laminate the surround (a magnet should be placed at the same time).

　　5.8. Assemble the birthday gift packing box (you can choose the gluing method according to your needs: brush the original glue on the substrate or glue with a glue gun to assemble the box. When assembling, take care to keep the birthday gift packing box clean to avoid leaking glue and affecting its appearance.)

  

    

　5.9. Attach the backing paper to the birthday gift packing box as required. (Take care to keep the box clean)

　5.10. Place the inner tray of the birthday gift packing box (asymmetrical upper and lower trays should be placed in different directions)

　5.11. Wipe the birthday gift packing box and box it up (the box will take some time to make and will inevitably be stained with soil and stains, so we need to wipe it down)

    

    

6. Making the birthday gift packing box (top and bottom lids).

    

　　The difference between a birthday gift packing box and a book-shaped box is that the front panel of a birthday gift packing box is divided by a V-slot into the front face, top face, back face and bottom of the box, and the panel is wrapped around the substrate to form the birthday gift packing box, hence the name. The top and bottom are separate (except for the conjoined top and bottom lids) and the production method is somewhat different:

  

    

6.1.The upper and lower lids of birthday gift packing boxes made of density board need to be fixed with white latex and dry-erase on the top and bottom respectively. (The upper and lower lid boxes made of grayboard can be secured with tape after the V-slots are cut and the four corners removed.)

6.2. Laminate the top and bottom of the birthday gift packing box with the crafted paper.

6.3. Attach the top lid of the birthday gift packing box to the bottom of the box to complete the assembly (the top and bottom lids of the box will need to be joined with a connector plate to form the top and bottom lids).

6.4. Place the inner tray of the birthday gift packing box, wipe the box and box it up.