Production process of flat pack gift boxes with lids

     

1. It is very important to improve the terminology of flat pack gift boxes with lids and popularize the terminology:

     

   The production process of flat pack gift boxes with lids is much more complicated than that of origami boxes. The post-processing of origami boxes is generally completed by printing - surface finishing - die cutting - gluing - inspection - packing. The production process of flat pack gift boxes with lids consists of printing--surface finishing--outer material die-cutting--gray board die-cutting--gray board slotting--gray board forming--outer material pasting--assembly-- Inspection - the packing is completed. From the process of the two products, the manufacturing process of flat pack gift boxes with lids is complicated and cumbersome, and the process standard of flat pack gift boxes with lids is also higher than that of origami boxes. From the perspective of daily terminology, the terminology of origami boxes is far less than that of flat pack gift boxes with lids. Therefore, it is very important to improve the terminology of flat pack gift boxes with lids craftsmanship and popularize the terminology.

    

 

     

2. Accurate communication of flat pack gift boxes with lids terminology can avoid and reduce errors:

    

Accurate exchange of flat pack gift boxes with lids terminology can not only avoid and reduce the occurrence of errors, but also have a positive effect on improving the production efficiency of flat pack gift boxes with lids and the accuracy of information transmission.

   

     

3. flat pack gift boxes with lids die cut:

     

   The die-cutting of flat pack gift boxes with lids is a very important part in the process of flat pack gift boxes with lids. Flat pack gift boxes with lids have higher technical requirements for die-cutting. Precision and accuracy determine the quality of the product. The error directly affects the quality of subsequent processing, the term name of the die-cutting process of flat pack gift boxes with lids is;

6. Half-cut (half-knife): Use a die-cutting knife to cut a line or a line of any shape with a depth of not less than two-thirds of the material thickness on flat pack gift boxes with lids cardboard and gray board.

3.2. Die-cutting and pressing: When die-cutting flat pack gift boxes with lids gray board, make a positioning mark, usually add a half-knife or trace line, which is convenient for positioning when pasting.

   

      

4. Slots for flat pack gift boxes with lids

    

Slotting is a key step in the production of flat pack gift boxes with lids. Before the gray board is formed, the gray board must be removed in a V shape, so that after the gray board is bent, the outside is straight and the inside is square, the edges and corners are clear, and the four corners are precisely matched. , the term name of the grooving process is;

   

     

4.1. Flat pack gift boxes with lids V-groove: Use a slotting machine to open a V-groove on a 1--4MM thick gray board, and generally keep a connection layer of about 0.25MM.

4.2. Flat pack gift boxes with lids slotting angle:

The V-groove is angled, generally 90 degrees, 120 degrees, or V-groove with different angles according to the product structure.

   

     

5. flat pack gift boxes with lids necessary process

     

Mounting is a necessary process in the process of flat pack gift boxes with lids. According to the requirements of different products, the copper paper, art paper, flannel, and leather are glued or sprayed through a glue machine, and they are tightly attached to the gray board. Tightly stick them together to make the two become one, so that the gray surface of the gray board has a new look, which not only beautifies the appearance of flat pack gift boxes with lids, but also improves the added value of flat pack gift boxes with lids.

 The usual packaging boxes are first mounted and then die-cut, but flat pack gift boxes with lids are first die-cut and then mounted. The purpose of this is to fear that the outer material will be stained and affect the appearance, and the second is to flat pack gift boxes with lids. Paying attention to the harmony of the overall effect, the back mount can completely cover the support body, so that the gray of the gray board is wrapped by the novel design of the outer material, and what we present to us is a beautiful artwork. The third is some flat pack gift boxes with lids with complex structure, which is still inseparable from manual operation. This is not because the machine cannot be replaced, but only by hand can every detail of the flat pack gift boxes with lids be pasted in place. Thereby, the outer mounted paper and the gray board are adhered more closely.

    

 

    

6. Flat pack gift boxes with lids Part name:

    

Each flat pack gift boxes with lids has countless parts, these parts are all parts of the box, and each part has different names, and the functions and functions of the different names are also different. It is very meaningful to define the parts clearly. The term name of the component is;

6.1. flat pack gift boxes with lids:

For pasting the printed surface or leather of the box body.

6.2. flat pack gift boxes with lids:

The parts wrapped around the inner box of the book-shaped box ring are formed by pasting with coated paper, art paper, leather, etc.

6.3. flat pack gift boxes with lids:

A piece of printed art paper, art paper or cardboard with the same size as the inner diameter is mounted on the top of the lid box.

6.4. flat pack gift boxes with lids:

The inside of the back of the flip box is a piece of paper used to connect the lid and the bottom of the box. The width is about 50mm, and the length is based on the inner diameter of the box width.

6.5. flat pack gift boxes with lids lining:

A part inside the box to fix the stability of the objects inside, it is made of cardboard, gray board, EVA and other materials.

6.6. flat pack gift boxes with lids:

In the lower part of the bottom box, a printed coated paper, art paper or cardboard with the same size as the inner diameter is mounted.

6.7. flat pack gift boxes with lids:

Printed surface or leather, die-cut for pasting the four sides of the box.

6.8. flat pack gift boxes with lids:

Paste the cardboard, white board with grey background or art paper into a square tube and put it on the outside of flat pack gift boxes with lids for protection.

6.9. flat pack gift boxes with lids back sticker:

The outer side of the back of the flip box is used to connect the lid and the bottom of the box. Coated paper or other paper is usually used to cover the gray background and white plate, and then stick it on the back of the lid and the bottom to connect the lid and the box. bottom role.

6.10. flat pack gift boxes with lids insert:

The inner side of the bottom box, which is higher than the height of the bottom box, has a circle around it. The gray boards of different thicknesses are pasted with paper, and they are embedded and glued around the inside of the bottom box.

6.11. flat pack gift boxes with lids:

Die-cut cover grey board.

6.12. flat pack gift boxes with lids bottom card:

Die-cut to form a grey board at the bottom of the box.

6.13. flat pack gift boxes with lids card:

Die-cut grey board card with insert edge.

6.14. flat pack gift boxes with lids open window:

A window of a suitable size is opened in a certain part of the box body, and a transparent material is pasted on the inside to display the shape of the contents.

6.15. flat pack gift boxes with lids

Usually the box inside the book box.

6.16. flat pack gift boxes with lids:

The lid box is larger than the bottom box or a box of the same size but with different graphic and color designs.

6.17. flat pack gift boxes with lids:

The Tiandi cover box is smaller than the cover box or a box of the same size but with different graphic and color designs.

6.18. flat pack gift boxes with lids inner jade:

The support parts placed in the flat pack gift boxes with lids for fixing items are generally blister shells or paper linings made.

6.19. flat pack gift boxes with lids OEM:

Signs or decorative parts used to display brand LOGO or beautify the surface of the box.

6.20. flat pack gift boxes with lids:

Printed, die-cut cardstock or other paper, glued to the surface of the blister case.

6.21. flat pack gift boxes with lids bows:

Woven into butterfly-shaped pieces with ribbons or other fabrics to beautify the decorative effect of the box.