Printing gift wrap box with lid enterprise summer safety production 6 major prevention areas

    

1. printing gift wrap box with lid enterprises should be how to do fire prevention, explosion-proof measures?

    

Every year, June is the national "production safety month", once again sounded the alarm on the production safety of printing gift wrap box with lid enterprises. Hot weather, humidity is a common feature of summer, accompanied by lightning, heavy rain and other extreme weather, to gift wrap box with lid safety production work brings great threat, in order to prevent accidents, to ensure safe production, printing gift wrap box with lid enterprises should do a good job fire prevention, explosion-proof measures?

    

     

2. remind gift wrap box with lid printing enterprises to pay attention to fire prevention:

     

Often cause a fire or explosion for a variety of reasons: film static electricity, workers operating errors, raw materials stacking area unreasonable, etc.. Special reminder gift wrap box with lid printing enterprises, packaging plants, usually must do a good job of fire and explosion-proof measures.

Today, China Rophone packaging according to the shift wrap box with lid printing enterprises are common to cause accidents in the dangerous areas of the points summarized and summarized, hope shift wrap box with lid printing enterprises to prevent accidents before they happen, check the hidden dangers, to avoid accidents "killer" of The hope is that gift wrap box with lid printers can prevent accidents before they happen, check for hidden dangers and avoid accident "killers"!

    

     

3. Area I: gift wrap box with lid workshop general area

    

Fire and explosion-proof measures:

3.1. prohibit fire to enter gift wrap box with lid workshop;

3.2. it is recommended to use explosion-proof electrical in gift wrap box with lid workshop as far as possible;

3.3. the ventilation system of gift wrap box with lid workshop is recommended to adopt the way of top feeding and bottom side exhausting to avoid the organic vapor gathering to reach the explosion limit;

3.4. place sufficient hand-held fire extinguishers and trolley fire extinguishers in the operating side of the gift wrap box with lid printing machine where they can be quickly retrieved and placed;

3.5. recommend the installation of a carbon dioxide fire extinguishing system for gift wrap box with lid presses.

    

    

4. Area 2: gift wrap box with lid ink storage area

   

Fire and explosion protection measures:

4.1. gift wrap box with lid ink should be placed in a leak-proof tray which should be able to hold 1.1 times the volume of a single drum of ink;

4.2. gift wrap box with lid leak-proof tray should have a grounding device.

   

    

5. Area III: gift wrap box with lid printing unit within the ink tray, ink barrel

    

Fire and explosion-proof measures:

5.1. gift wrap box with lid ink trays, ink drums, ink pumps to have effective grounding clamps connected, and between the three to have a cross-connection;

5.2. weekly cleaning gift wrap box with lid equipment low exhaust device to ensure effective ventilation;

5.3. gift wrap box with lid ink barrel, ink tray as far as possible to add a cover to reduce volatilization;

5.4. gift wrap box with lid spilled on the floor of the solvent and ink to clean up immediately.

    

    

6. area IV: gift wrap box with lid printing rubber roller

    

Fire and explosion-proof measures:

6.1. gift wrap box with lid printing rubber rollers before and after the electrostatic brush device, electrostatic brush distance from the film to maintain at 3 ~ 5 mm is good;

6.2. daily inspection gift wrap box with lid rubber roller electrostatic brush, and timely cleaning, such as can not be cleaned in time to replace;

6.3. pay special attention to the equipment equipped with electrostatic ink-absorbing device, and avoid sparks from electrostatic ink-absorbing start during the process of pressing and lifting the gift wrap box with lid rubber roller.

   

    

7. Area V: gift wrap box with lid winding and unwinding, fire and explosion-proof measures:

    

7.1. the process of winding and rewinding will have more electrostatic accumulation, workers in touch gift wrap box with lid coil surface and the human body will occur between the obvious discharge phenomenon, it is recommended to do a good job of the installation and maintenance of electrostatic brush at the winding and rewinding rolls;

7.2. conditional gift wrap box with lid unit should be installed humidifier control workshop humidity to eliminate static electricity.

    

    

8. area VI: gift wrap box with lid workshop electrical cabinets, fire and explosion-proof measures:

    

8.1. weekly inspection of gift wrap box with lid workshop electrical cabinet ventilation fans to ensure good heat dissipation;

8.2. ensure that gift wrap box with lid workshop electrical cabinets are dusted and cleaned regularly.

    

    

9. Safety production gift wrap box with lid is the top priority in our work:

     

Safe production gift wrap box with lid is the top priority in our work! Whether it is flammable and explosive materials, or a variety of toxic substances or various types of occupational hazards, are not to be ignored. Daily gift wrap box with lid production process must be properly handled, good supervision and supervision, regular inspection and testing.